Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light of a Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Tail light

Open the boot and secure it; locate the screws securing the rear light (inside the boot); open the plastic inspection cap (located in the boot) and unscrew all the screws holding the light. Use a lever to detach the light from its housing and disconnect the power connectors (if necessary, remove the lower part of the boot). After replacing the damaged light with a new one, fit the new light into the car's bodywork. Finally, test the correct operation of the bulbs installed with the new light. -Screwdriver -Plastic lever -Protective gloves -Socket wrench.

Updated on 8 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Headlamp of a Ford Focus
How to Remove the Front Headlamp of a Ford Focus
Ford Focus (2011-2018 / MK 3) Before starting, open the bonnet of your Ford Focus. Begin by unscrewing and removing the screws that secure the front headlamp to the car's frame. N…
How to Remove the Rear Light of the Ford Focus MK3
How to Remove the Rear Light of the Ford Focus MK3
Ford Focus (2011-2018 / MK 3) In this brief and simple video, learn how to remove and replace the rear light on the Ford Focus Mk3. First, open the boot and start by unscrewing th…
Replacing Rear Bulbs on a Ford Focus
Replacing Rear Bulbs on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Let's look at replacing the bulbs in the rear light of a Ford Focus. Open the tailgate to access the rear light, unscrew the securing screws on eithe…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos