Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Key Fob Shell on a Ford F-150

Model: Ford F-150 MK 12 - Years 2009-2014
Part: Key

Here are the instructions to disassemble and replace the key fob shell on a Ford F-150. First, take your key fob and use a thin, pointed tool to pry open the side slot; then remove the battery located inside, followed by the electronic board with the transponder, and finally the physical key, as shown in the video. At this point, correctly install all components into the new key shell and verify its functionality!

Posted on 14 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford F-150 (2015-2020 / MK 13) In this video tutorial, you will see how to replace the batteries in the key fob for a Ford F-150. The first thing to do is prepare two batteries for…
Ford F-150 (2015-2020 / MK 13) To replace the battery in the key fob for a Ford F-150, take the fob and locate the mechanical key release button. Press the button and pull out the …
Ford F-150 (2015-2020 / MK 13) In this very short and useful video tutorial today, you will be shown the entire step-by-step process to replace the battery of your Ford F 150 key, …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos