Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Light Bulbs on Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Tail light bulb

Replace the bulbs inside the rear light if damaged. Open the boot lid, remove the plastic cap located at the side of the boot, and unscrew the plastic nuts in the inspection area. Once the light is free from any constraints, detach it from the bodywork. Replace the damaged bulbs with new ones (same voltage and size as the original), inserting them into the bulb holder. Fit the light back into the car's bodywork. Screw in the plastic nuts inside the inspection area and connect the power terminals. Close the boot lid.

Updated on 16 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the rear taillight of the Ford Focus
Replacement of the rear taillight of the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Today we will see the information that will show us how to disassemble and replace the rear taillight and its bulbs of the Ford Focus. First, we open…
How to replace the rear headlight bulb of the Ford Focus
How to replace the rear headlight bulb of the Ford Focus
Ford Focus (2011-2018 / MK 3) Let's see the steps that will allow us to disassemble and replace the rear headlight bulbs of the Ford Focus. First of all, we open the rear hatch of…
How to disassemble the rear headlight of the Ford Focus
How to disassemble the rear headlight of the Ford Focus
Ford Focus (1998-2004 / MK 1) In this guide, we will discover the information that will allow us to disassemble and replace the rear headlight and its bulbs of the Ford Focus. Fir…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos