Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Reverse Light Bulb on Ford Focus

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Tail light bulb

Rear lamp with blown bulbs, here’s how to change them on the Focus. Open the boot lid, unscrew the securing screws on the side of the lamp using a screwdriver. Disconnect the rear lamp from its housing once all screws are removed (disconnect the bulb holders connected to the power supply) and replace the damaged bulbs with new ones (same size and voltage). Finally, refit the lamp with the associated screws and reconnect the power terminals. Screw in the screws on the sides of the lamp and check the operation of the new bulbs fitted in the lamp.

Updated on 15 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Reversing Bulb from a Ford Focus
How to Remove the Reversing Bulb from a Ford Focus
Ford Focus (1998-2004 / MK 1) Before you can start, open the rear hatch of the boot on your Ford Focus. Begin by unscrewing and removing the screws that secure the rear light to t…
How to Replace the Reverse Light Bulbs in the Ford Focus?
How to Replace the Reverse Light Bulbs in the Ford Focus?
Ford Focus (1998-2004 / MK 1) In this tutorial, you will learn how to remove the rear light of the Ford Focus and replace the bulbs, including the reverse light bulb located in th…
How to Change the Reverse Light Switch on Ford Focus
How to Change the Reverse Light Switch on Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) The reverse light switch rarely fails, but if it does, it is easy to replace. This device is a small internal switch that activates the reverse light…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos