Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Reverse Light Bulbs in the Ford Focus?

Model: Ford Focus MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Tail light bulb

See other generations:
Video tutorial

In this tutorial, you will learn how to remove the rear light of the Ford Focus and replace the bulbs, including the reverse light bulb located in the right light unit. You will need a Torx T25 key, as well as the correct replacement bulb.

Start by opening the tailgate, then unscrew the two fixing screws along the inner edge of the light. Next, grasp the light, pull it outwards, and remove it from the bodywork.

Finally, disconnect the connector, remove the inner plate, and proceed with replacing the bulb. Follow the reverse procedure to reassemble everything.


Updated on 14 May 2026 by ScegliAuto


Related tutorials

Replacing Rear Headlight Bulb in Ford Focus
Replacing Rear Headlight Bulb in Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) In this video tutorial, learn how to disassemble and replace the bulbs in the rear headlight of a second-generation Ford Focus. First, open the boot …
Changing Rear Light Bulb on Ford Focus 2016
Ford Focus (2011-2018 / MK 3) How do you change the bulb in the rear light of a Ford Focus? Let's see how to remove the rear light from inside the car's bodywork. Open the boot li…
How to Replace the Rear Light Bulb on a Ford Focus
How to Replace the Rear Light Bulb on a Ford Focus
Ford Focus (1998-2004 / MK 1) Before you begin, open the boot of your Ford Focus. Start by unscrewing the screws securing the rear light. Next, pull the light out of its housing. …

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos