Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Rear Headlight Bulb in Ford Focus

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Tail light bulb

In this video tutorial, learn how to disassemble and replace the bulbs in the rear headlight of a second-generation Ford Focus. First, open the boot and use a screwdriver to unscrew the side screws of the headlight: then detach the headlight and access the rear, where the bulbs are located. Disconnect the electrical connector to remove the unit and then remove the bulbs by twisting and pulling them out with the entire bulb holder; replace it with the new one and then reassemble everything, following the video to the end!

Updated on 30 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulb of the Ford Focus
How to replace the rear headlight bulb of the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Today we will explain how to replace the rear headlight bulb of the Ford Focus. First, open the trunk of the vehicle and then unscrew the screw that …
How to replace the front headlight bulb of the Ford Focus 2
How to replace the front headlight bulb of the Ford Focus 2
Ford Focus (2004-2011 / MK 2, Focus 2) In this new guide dedicated to all of you who own a second series Ford Focus, we will discover how to correctly replace the headlight bulb. First of …
Changing Rear Light Bulb on Ford Focus 2016
Ford Focus (2011-2018 / MK 3) How do you change the bulb in the rear light of a Ford Focus? Let's see how to remove the rear light from inside the car's bodywork. Open the boot li…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos