Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the rear headlight bulb of the Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Tail light bulb

Below we will see the main instructions that will allow us to dismantle and replace the rear headlight bulbs of the Ford Focus. First, we open the rear hatch of the trunk and start removing the side trim; then we unscrew the screws of the headlight and disconnect the electrical connector of the stop bulbs, as shown in the video. At this point we separate the bulb holder from the light fixture, replacing any faulty bulbs with new ones; we reassemble the lights on the stop light to reassemble it, making the electrical connection!

Posted on 7 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light Bulb on a Ford Focus
How to Replace the Rear Light Bulb on a Ford Focus
Ford Focus (1998-2004 / MK 1) Before you begin, open the boot of your Ford Focus. Start by unscrewing the screws securing the rear light. Next, pull the light out of its housing. …
How to replace the rear headlight bulb of the Ford Focus
How to replace the rear headlight bulb of the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Today we will explain how to replace the rear headlight bulb of the Ford Focus. First, open the trunk of the vehicle and then unscrew the screw that …
How do you replace the rear headlight bulb of the Ford Focus?
How do you replace the rear headlight bulb of the Ford Focus?
Ford Focus (1998-2004 / MK 1) .. The replacement of the rear headlight bulb of the Ford Focus is carried out by opening the rear hatch, so.. …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos