Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Tire pressure warning light

Resetting the tyre pressure light on a Ford Focus is a relatively simple operation that can be performed through the onboard computer settings. First, after manually checking that the tyre pressures are adjusted according to the parameters, access the onboard menu using the right button located among the directional buttons on the left side of the steering wheel. Once in the menu, scroll until you reach the 'settings' option and access it using the left button. Among the various settings, there will be an option for 'assisted driving' where you can enter by pressing the left button again. Scroll within this section until you find 'tyre monitoring'. Once you reach 'tyre monitoring', press and hold the 'OK' button to reset the light until all the loading ticks are filled.

Updated on 17 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Light on the Ford Focus 4
How to Reset the Tyre Pressure Light on the Ford Focus 4
Ford Focus (2018-2025 / MK 4) Watch this video to see how to reset the tyre pressure light on the fourth generation Ford Focus in simple steps; before resetting the light, ensure …
How to Reset the Tyre Pressure Light on a Ford Focus MK3
How to Reset the Tyre Pressure Light on a Ford Focus MK3
Ford Focus (2011-2018 / MK 3) This guide explains how to reset the tyre pressure light on a third-generation Ford Focus; before performing the steps, ensure all four tyres are at …
How to Reset the Tyre Pressure Light on the Ford Focus?
How to Reset the Tyre Pressure Light on the Ford Focus?
Ford Focus (2018-2025 / MK 4) In this tutorial, you will see how to reset the tyre pressure light on the Ford Focus, a very simple and quick operation that should be done only aft…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos