Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on the Ford Focus 4

Model: Ford Focus MK 4 - Years 2018-2025
Part: Tire pressure warning light

Watch this video to see how to reset the tyre pressure light on the fourth generation Ford Focus in simple steps; before resetting the light, ensure that all four tyres are at the correct operating pressure. Then, get in the vehicle and start the engine; use the buttons on the steering wheel to scroll to the tyre pressure menu. At this point, follow the indicated procedure and confirm the reset of the TPMS light, following the video tutorial to the end!

Updated on 7 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tyre pressure warning light on the Ford Focus?
How to reset the tyre pressure warning light on the Ford Focus?
Ford Focus (2011-2018 / MK 3) To reset the tyre pressure warning light on the Ford Focus, do not perform any operations with the buttons on the steering wheel or near the instrume…
How to Reset the Tyre Pressure Warning Light on a Ford Focus mk3
How to Reset the Tyre Pressure Warning Light on a Ford Focus mk3
Ford Focus (2011-2018 / MK 3) This guide shows how to reset the tyre pressure warning light on a Ford Focus mk3. No tools or specialist knowledge are required for this operation. …
How to Reset the TPMS Light on the Ford Focus
How to Reset the TPMS Light on the Ford Focus
Ford Focus (2011-2018 / MK 3) Today, we will see how to reset the tyre pressure monitoring system (TPMS) light on a Ford Focus vehicle. Before resetting the light, it is important…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos