Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Front Headlamp from Ford Focus

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight

See other generations:
Video tutorial

Today, you will learn how to remove the front headlamp from a third-generation Ford Focus. First, open and lift the bonnet of the car and use a screwdriver to remove the support screws for the headlamp bracket, located at the bottom and on the edges of the headlamp.

At this point, disconnect the electrical connector of the bulbs to detach it completely from the car. You can then replace the bulbs if necessary, pulling the bulb holder (if it is the position light) or extracting the cable along with the bulb (if it is the headlamp).


Updated on 30 March 2026 by ScegliAuto


Related tutorials

How to Remove the Front Headlamp of a Ford Focus
How to Remove the Front Headlamp of a Ford Focus
Ford Focus (2011-2018 / MK 3) Before starting, open the bonnet of your Ford Focus. Begin by unscrewing and removing the screws that secure the front headlamp to the car's frame. N…
Removing the Headlight on Ford Focus
Removing the Headlight on Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Want to remove the front headlight from the Ford Focus? The headlight is secured with retaining screws, so let’s see how to do it. Unscrew the retain…
How to Disassemble the Front Headlamp of the Ford Focus
How to Disassemble the Front Headlamp of the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Do you want to replace the front headlamp or the bulbs? Let's see how to disassemble the front headlamp on a Focus. Lift the bonnet and locate the pl…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos