Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Tailgate Panel on a Ford Focus

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011

This short video shows you how to remove (and possibly replace) the rear tailgate panel of your Ford Focus. This task may be useful, for example, if you need to disassemble and change the release mechanism for the tailgate in your car. First, using an appropriate tool, unscrew all the screws that hold the panel to the tailgate. Next, detach the panel from the structure by gently prying with a flat, thin tool. Once you have completed the internal work or replaced the old panel with a new one, reassemble everything by following the reverse process. Job done!

Updated on 31 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Boot Release System on a Ford Focus
How to Replace the Boot Release System on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) This video will show you how to remove and replace the rear boot release system on a Ford Focus. After opening the boot, unscrew the screws that hold…
How to Remove the Tailgate Gas Struts on Ford Focus
How to Remove the Tailgate Gas Struts on Ford Focus
Ford Focus (1998-2004 / MK 1) How do you remove the tailgate gas struts on a Ford Focus? Follow this video to replace the struts on a tailgate: Lift the tailgate and secure it. Us…
How to Replace the Boot Lock of the Ford Focus
How to Replace the Boot Lock of the Ford Focus
Ford Focus (2011-2018 / MK 3) Today's step-by-step instructions will show you how to remove and replace the lock of the rear tailgate of the Ford Focus. First, open the boot and b…

    Frequently Asked Questions

    • Focus 2004-2011 - Where are the fuse boxes in the Ford Focus Mk2? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos