Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Radio from Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Car stereo

See other generations:
Video tutorial

In today's video tutorial, learn how to remove the radio from a third series Ford Fiesta in simple steps. First, get inside the car and grab a plastic lever: remove the lower plastic trim by prying at the sides, then remove the upper plastic trim (the one around the dashboard).

Next, remove the Torx screws located underneath and start pulling the radio controls, disconnecting the electrical connector; extract the radio by disconnecting the electrical connectors and the antenna cable, as illustrated in the video!


Updated on 6 April 2026 by ScegliAuto


Related tutorials

How to enter the radio code for the Ford Fiesta
How to enter the radio code for the Ford Fiesta
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) Discover in this short and simple guide how to find and enter the radio code for the Ford Fiesta by following the instructions below. First, get insi…
How to Obtain the Radio Code for the Ford Fiesta
How to Obtain the Radio Code for the Ford Fiesta
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) In this video tutorial, you will learn how to obtain the radio code for the Ford Fiesta by following the instructions below. First, get inside the ve…
Replacing the Standard Radio in the Ford Fiesta
Replacing the Standard Radio in the Ford Fiesta
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) Below are the instructions to remove and replace the standard radio in the Ford Fiesta, following these simple and quick steps. First, get inside the…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos