Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Rear Light

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008
Part: Tail light bulb

To replace the bulbs in the rear light, it is necessary to remove the light itself: open the rear boot and locate the two fixing screws of the light (Torx 20); they are found along the inner edge, between the seal and the light itself, at the two ends. Once the screws are removed, pull the light perpendicularly outwards without rotating it, as there are two pressure clips along the edge of the bodywork. At this point, you can access the bulb holder and replace the blown bulb if necessary.

Updated on 7 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Light of a Ford Fiesta
Removing the Rear Light of a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) How to remove the rear light of a Ford Fiesta? Follow this video guide to remove the right rear light. Open the boot, lift the covering cloth as show…
Disassembling the Rear Headlight on a Fiesta
Disassembling the Rear Headlight on a Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Do you want to replace the damaged rear headlight on a Ford Fiesta? Let's see how to disassemble the rear headlight. Open the rear hatch of the car, …
Removing Rear Lights on a Fiesta
Removing Rear Lights on a Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Do you want to replace the bulbs in the rear light? Unsure how to do it? Let's see how to remove the rear light for bulb replacement. Open the boot, …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos