Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the rear light of a Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Tail light

Through this very short video tutorial today, you will be able to see the entire necessary procedure step by step to disassemble the rear light of a Ford Fiesta, sixth generation model produced from 2011 to 2019. So let's start the operation by opening the rear trunk of the car, then, with a cross key, we must remove the two fixing screws of the light as shown in the video and then detach the rear light from its seat. Once this is done, all that remains is to disconnect the wiring of the rear lights of the light and finally remove it completely.

Posted on 7 June 2024 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Light on Ford Fiesta
Removing the Rear Light on Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In today's tutorial, we will see how to remove the rear light of a Ford Fiesta in simple steps. First, open the boot lid and use a Torx screwdriver t…
Removing the Rear Light on a 2008 Ford Fiesta
Removing the Rear Light on a 2008 Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In today's tutorial, you will learn how to remove the rear light to replace the bulbs on a 2008 Ford Fiesta. First, open the boot lid and unscrew the…
How to remove the rear light and replace the bulbs of the Ford Fiesta
How to remove the rear light and replace the bulbs of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) The instructions in this guide will show us how to disassemble and replace the rear light and its bulbs of the Ford Fiesta. First of all, we open the…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos