Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Mudguard from a Ford Focus

Model: Ford Focus MK 1 - Years 1998-2004

Before you start, engage the handbrake and put the first gear in your Ford Focus, then lift the car. Begin by removing the front wheel by loosening the relevant securing bolts. Next, unclip and remove the inner wheel arch by disengaging the securing clips. This will expose the bolts that secure the mudguard to the car's chassis, which you will need to loosen and remove. Once you complete this last step, you will have successfully removed the mudguard.

Updated on 8 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Headlamp of a Ford Focus
How to Remove the Front Headlamp of a Ford Focus
Ford Focus (2011-2018 / MK 3) Before starting, open the bonnet of your Ford Focus. Begin by unscrewing and removing the screws that secure the front headlamp to the car's frame. N…
How to Remove the Front Bumper from a Ford Focus
How to Remove the Front Bumper from a Ford Focus
Ford Focus (1998-2004 / MK 1) Before you start, open the bonnet of your Ford Focus. Begin by unscrewing and removing the screws and bolts located around the perimeter of the bumpe…
Removing the Front Seat from a Ford Focus
Removing the Front Seat from a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) This guide shows how to remove the front seat from a Ford Focus. This operation can be done independently without a mechanic and takes very little ti…

    Frequently Asked Questions

    • Focus 2004-2011 - Where are the fuse boxes in the Ford Focus Mk2? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos