Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Wing on the Ford Focus MK1

Model: Ford Focus MK 1 - Years 1998-2004

In this video, you will find the main instructions to remove the front wing on a first-generation Ford Focus. First, lift the vehicle at the front and start by removing the front wheel; then remove all the plastic clips found in the wheel arch, taking out the arch liner. At this point, open the bonnet and use a 10 mm socket to unscrew the upper screws of the wing; disconnect the electrical connector of the indicator bulb and gently remove the wing, as shown in the video!

Updated on 18 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Front Wing on Ford Focus 2.0 TDCi MK3
Removing the Front Wing on Ford Focus 2.0 TDCi MK3
Ford Focus (2011-2018 / MK 3) In this video tutorial, you will learn how to remove the front wing on a third-generation Ford Focus, following the instructions below. First, you ne…
Replacement of the front fog light bulbs of the Ford Focus.
Replacement of the front fog light bulbs of the Ford Focus.
Ford Focus (2011-2018 / MK 3) In this short guide, we will see the instructions that will allow us to disassemble and replace the front fog lights of the Ford Focus. First of all,…
Removing the Front Bumper of a Ford Focus
Removing the Front Bumper of a Ford Focus
Ford Focus (1998-2004 / MK 1) Removing the front bumper of the Ford Focus? Follow this guide to remove the bumper. Release and lift the bonnet and secure it. Unscrew the securing …

    Frequently Asked Questions

    • Focus 2004-2011 - Where are the fuse boxes in the Ford Focus Mk2? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos