Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Wing on Ford Focus 2.0 TDCi MK3

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove the front wing on a third-generation Ford Focus, following the instructions below. First, you need to remove the front bumper; then open the bonnet and unscrew all the upper and lower fixing screws of the bumper, also removing the screws found on both sides of the wheel arches; remove the front lights and take off the bumper.

At this point, remove the lower clips of the wing and any side skirt; unscrew the upper screws of the wing in the engine bay to finally remove it!


Updated on 18 April 2026 by ScegliAuto


Related tutorials

Removing the Front Wing on the Ford Focus MK1
Removing the Front Wing on the Ford Focus MK1
Ford Focus (1998-2004 / MK 1) In this video, you will find the main instructions to remove the front wing on a first-generation Ford Focus. First, lift the vehicle at the front an…
Replacing the Timing Belt on the Ford Focus 1.6 TDCi
Replacing the Timing Belt on the Ford Focus 1.6 TDCi
Ford Focus (2011-2018 / MK 3) You will see step-by-step instructions on how to remove and replace the timing belt on the Ford Focus 1.6 TDCi. First, open the bonnet and begin by r…
How do you replace the timing belt of the Ford Focus 2.0 TDCi?
How do you replace the timing belt of the Ford Focus 2.0 TDCi?
Ford Focus (2004-2011 / MK 2, Focus 2) To replace the timing belt of the Ford Focus 2.0 TDCi, you need to open the hood and then loosen the screws that hold the corresponding front wheel: …

Other guides you may be interested in

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos