Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Wing on a Ford Focus

Model: Ford Focus MK 1 - Years 1998-2004
Part: Checks and maintenance

Let's see how to remove the wing from a Ford Focus. Lift the car with a jack or column lift, then remove the wheel to access underneath the wing. Unscrew the fastening pins located at the sides of the splash guard (right and left). Remove the pins located under the wing of the car. Lift the bonnet and unscrew the screws at the sides of the wing. Once the wing is free from any screws or pins, take it by hand and pull it away from the bodywork (use a plastic or metal lever if needed). Finally, fit the new wing following the steps taken during disassembly. Lower the car after maintenance (fit the wheel).

Updated on 16 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Focus (1998-2004 / MK 1) Before you start, open the bonnet of your Ford Focus. Begin by unscrewing and removing the screws and bolts located around the perimeter of the bumpe…
Ford Focus (2011-2018 / MK 3) In this video, you will see the instructions on how to remove the washer fluid reservoir and pump on a Ford Focus Mk3. First, lift the vehicle from t…
Ford Focus (2004-2011 / MK 2, Focus 2) Detach the plastic cover on the front pillar, near the mirror, using a screwdriver or a plastic trim tool. Then remove the now exposed screw that was…

Other guides you may be interested in

    Frequently Asked Questions

    • Focus 2004-2011 - What problems encountered on the Ford 1.6 tdci 90 hp engine? Read answer
    • Focus 2004-2011 - Where is the outside temperature sensor of a Ford Focus located? Read answer
    • Focus 1998-2004 - Where is the immobilizer of a Ford Focus located? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos