Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Car Radio Removal Instructions

Model: Ford Galaxy MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Car stereo

See other generations:
Video tutorial

The first operation is to remove the trim surrounding the car radio, climate control buttons, gear lever, and handbrake: it is a single element, and to detach it, start from the rear, where the cup holder is located (use a plastic lever to pry along the edges).

Next, remove the central dashboard trim, which is also clipped in place: simply pull it. At this point, you can unscrew the fixing screws of the trim that includes the climate control buttons, then move on to the screws securing the car radio itself: pull it forward and disconnect the plugs.


Updated on 7 February 2026 by ScegliAuto


Related tutorials

How to Remove the Radio from a Ford Galaxy
Ford Galaxy (2006-2015 / MK 2) Before you can start, sit in the driver's seat of your Ford Galaxy. Begin by prising off and removing the radio trim to expose the fixing screws. Nex…
How to Replace the Standard Radio in a Ford Galaxy
How to Replace the Standard Radio in a Ford Galaxy
Ford Galaxy (2015-2023 / MK 3) The instructions in this guide will help you remove and replace the standard radio in a Ford Galaxy. First, get inside the vehicle and start by remov…
How to Dismantle the Radio in a Ford Galaxy
How to Dismantle the Radio in a Ford Galaxy
Ford Galaxy (1995-2006 / MK 1) In case of a fault with the radio or if you want to replace it with a newer, more efficient model, you need to completely remove the component. This …

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos