Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Radio in a Ford Galaxy

Model: Ford Galaxy MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Car stereo

See other generations:
Video tutorial

In case of a fault with the radio or if you want to replace it with a newer, more efficient model, you need to completely remove the component. This is not a complex operation, but you should take a few precautions to ensure maximum safety.

First, make sure the engine is off and, importantly, disconnect the battery. Then, obtain some small, thin metal rods and insert them into the four holes located at the corners of the radio.

At this point, gently push outward while simultaneously pulling towards you. Finally, disconnect the connector to completely free the radio.


Updated on 5 June 2026 by ScegliAuto


Related tutorials

How to Remove the Radio from a Ford Galaxy
Ford Galaxy (2006-2015 / MK 2) Before you can start, sit in the driver's seat of your Ford Galaxy. Begin by prising off and removing the radio trim to expose the fixing screws. Nex…
How to Remove the Fuel Pump on a Ford Galaxy
How to Remove the Fuel Pump on a Ford Galaxy
Ford Galaxy (2006-2015 / MK 2) How do you remove the fuel pump on a Ford Galaxy? Open the rear door of the car and access the rear seats: remove the seat cushions. Locate the metal…
How to Replace the Radio of the Ford Galaxy
How to Replace the Radio of the Ford Galaxy
Ford Galaxy (2006-2015 / MK 2) First, disconnect the bonnet and lift it to disconnect the cables from your vehicle's battery. This will protect the electronic devices. To access th…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos