Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide on How to Dismantle the Rear Light on the Ford Transit Courier

Model: Ford Transit MK 8 - Years 2014-2024
Part: Tail light

In this brief guide, you will find instructions that will allow you to dismantle and replace the rear light on the 2015 Ford Transit Courier, following these simple and quick steps. First, open the rear doors; then proceed to remove the plastic covers located on the sides of the lights by prying with something thin, as shown in the video. At this point, locate the two fastening screws for the rear light underneath; once unscrewed, you can remove the light by disconnecting the electrical connector for the bulbs. Apply the reverse procedure for reassembly!

Updated on 25 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Service Light on a Ford Transit Courier
Resetting the Service Light on a Ford Transit Courier
Ford Transit (2014-2024 / MK 8) Resetting the service light on a Ford Transit Courier, produced from 2014 to 2022, is a very quick operation that can be done independently after ser…
Resetting the Oil Warning Light on a Ford Transit Courier
Resetting the Oil Warning Light on a Ford Transit Courier
Ford Transit (2014-2024 / MK 8) To reset the oil warning light after servicing a Ford Transit Courier mk8 (2014-2022) is a very simple and quick operation, as shown in today's tutor…
How to Reset the Service Light on a Ford Transit Courier?
How to Reset the Service Light on a Ford Transit Courier?
Ford Transit (2006-2014 / MK 7) In today's video, we will see how to reset the service light on a Ford Transit Courier. First, enter the vehicle. Press the brake and accelerator ped…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos