Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulb on the Ford Focus MK3

Model: Ford Focus MK 3 - Years 2011-2018
Part: Headlight bulb

Discover in this guide how to remove and replace the front headlight bulb on the Ford Focus third series, from 2014, by following these simple steps. First, open the bonnet of your car and start by removing the front headlight; to do this, unscrew the fastening screws located on the sides, then disconnect the electrical connector of the bulbs, as shown in the video. At this point, remove the protective caps of the bulbs and disconnect the electrical cable; all that remains is to remove and replace the bulbs, following the tutorial until the end!

Updated on 25 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb of the 2016 Ford Focus
How to replace the front headlight bulb of the 2016 Ford Focus
Ford Focus (2011-2018 / MK 3) If you own a Ford Focus Mk3 (year 2016) and want to replace one of the bulbs in the front headlight on your own, then all you have to do is carefully…
How to Replace the Front Fog Light Bulb on a Ford Focus MK3
How to Replace the Front Fog Light Bulb on a Ford Focus MK3
Ford Focus (2011-2018 / MK 3) Discover in this video how to remove and replace the front fog light bulb on the third series Ford Focus by following these simple steps. First, remo…
How to Replace the Front Headlight Bulb of a Ford Focus
How to Replace the Front Headlight Bulb of a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Before you begin, open the front bonnet of your Ford Focus. Start by unscrewing and removing the screws that secure the front headlamp. Next, pull th…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos