Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace Diesel Filter on Galaxy

Model: Ford Galaxy MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Diesel fuel filter

See other generations:
Video tutorial

Do you want to replace the diesel filter on a Ford Galaxy? Let's look at removing the diesel filter from its designated area. Lift the front bonnet, locate the diesel filter.

Disconnect all fuel circulation hoses and the electrical connectors for the filtration system. Remove the diesel filter from its housing and replace it with a new one of the same type.

Once the new diesel filter is installed, reconnect all the circulation hoses and electrical connectors. Start the engine and perform a functionality test.


Updated on 1 May 2026 by ScegliAuto


Related tutorials

How to Replace the Diesel Filter on the Ford Galaxy 1.6 TDCi
How to Replace the Diesel Filter on the Ford Galaxy 1.6 TDCi
Ford Galaxy (2006-2015 / MK 2) Today's instructions will illustrate the procedure for removing and replacing the diesel filter on the Ford Galaxy 1.6 TDCi. First, open the vehicle'…
How to Replace the Fuel Filter on a Ford Galaxy
How to Replace the Fuel Filter on a Ford Galaxy
Ford Galaxy (1995-2006 / MK 1) In this video tutorial, you can see how to replace the fuel filter on a Ford Galaxy by following some simple steps: the first thing to do is to purch…
How to Replace Air Filter on Ford Galaxy
How to Replace Air Filter on Ford Galaxy
Ford Galaxy (2006-2015 / MK 2) Replace the air filter of a Ford Galaxy if you have reached the mileage indicated in the workshop manual. Open the car door, pull up the engine compa…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos