Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on the Ford F-150?

Model: Ford F-150 MK 13 - Years 2015-2020
Part: Door trim panel

If you need to replace the lock, window regulator, or speaker in the Ford F-150, you must first remove the door panel. You can see how to proceed in the attached video tutorial. Start by removing the two lower bolts with a 7mm socket wrench, take off the small side reflector panel, and unscrew the screw inside the slot. Locate the rectangular panel just below the grab handle, remove it, and unscrew the two additional indicated screws. Finally, unscrew the last screw located right behind the internal cover of the mirror. At this point, you can detach the panel from the door and disconnect the connectors.

Updated on 2 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel on a Ford F-150 Pickup?
How to Remove the Door Panel on a Ford F-150 Pickup?
Ford F-150 (2004-2008 / MK 11) Removing the door panel on a Ford F-150 pickup, as shown in this tutorial, is an extremely simple and quick operation. For this, you will need a sock…
How to remove the door panel of the Ford F 150
How to remove the door panel of the Ford F 150
Ford F-150 (2015-2020 / MK 13) Today we will explain how to remove the front door panel of the Ford F 150. We start by removing the cover of the door handle by levering it. Then we…
How to Remove the Door Panel from a Ford F-150?
How to Remove the Door Panel from a Ford F-150?
Ford F-150 (2015-2020 / MK 13) To remove the door panel from a Ford F-150, first detach the triangular panel located by the external rearview mirror. Once this is removed, you will…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos