Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Door Speaker on a Ford F-150 MK13

Model: Ford F-150 MK 13 - Years 2015-2020
Part: Speaker

In today's video, you will learn how to remove and replace the front door speaker on a Ford F-150 of the thirteenth generation. First, open the front door and start removing the door panel; to do this, unscrew the panel's mounting screws, removing the various plastic covers as shown in the video. At this point, disconnect the electrical connector from the speaker and unscrew the side screws to remove it; then replace the speaker with the new one, inserting it into place and connecting the various wiring, following the video tutorial until the end!

Updated on 31 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Speakers of the Ford F-150 MK13
Replacing the Front Speakers of the Ford F-150 MK13
Ford F-150 (2015-2020 / MK 13) In this video tutorial, you will learn how to remove and replace the front speakers of the Ford F-150, in its thirteenth generation. First, open the …
How to Remove the Door Panel on the Ford F-150?
How to Remove the Door Panel on the Ford F-150?
Ford F-150 (2015-2020 / MK 13) If you need to replace the lock, window regulator, or speaker in the Ford F-150, you must first remove the door panel. You can see how to proceed in …
How to disassemble the rear door of the Ford F-150 truck bed
How to disassemble the rear door of the Ford F-150 truck bed
Ford F-150 (2015-2020 / MK 13) Below we will see the instructions that will allow us to disassemble and replace the rear door of the Ford F-150 truck bed. First, move to the rear o…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos