Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Tailgate of the Ford F-150 MK13

Model: Ford F-150 MK 13 - Years: 2015, 2016, 2017, 2018, 2019, 2020
Part: Car door

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove the tailgate of the Ford F-150 thirteenth generation by following these simple steps. First, move to the wheel well side and disconnect the electrical connector; then open the tailgate and start by unhooking the side straps, as shown in the video.

At this point, unhook the tailgate from the hinges by lifting it upward to remove it completely; all that’s left is to reassemble everything by applying the reverse procedure of disassembly!


Updated on 9 June 2026 by ScegliAuto


Related tutorials

How to Replace the Door Speaker on a Ford F-150 MK13
How to Replace the Door Speaker on a Ford F-150 MK13
Ford F-150 (2015-2020 / MK 13) In today's video, you will learn how to remove and replace the front door speaker on a Ford F-150 of the thirteenth generation. First, open the front…
How to disassemble the rear door of the Ford F-150 truck bed
How to disassemble the rear door of the Ford F-150 truck bed
Ford F-150 (2015-2020 / MK 13) Below we will see the instructions that will allow us to disassemble and replace the rear door of the Ford F-150 truck bed. First, move to the rear o…
How to Remove the Rear Headlight on a Ford F-150?
How to Remove the Rear Headlight on a Ford F-150?
Ford F-150 (2015-2020 / MK 13) In this tutorial, you will see how to remove the rear headlight on a Ford F-150 pickup, in case you need to replace a burnt-out bulb or the headlight…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos