Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear door of the Ford F-150 truck bed

Model: Ford F-150 MK 13 - Years 2015-2020
Part: Car door

Below we will see the instructions that will allow us to disassemble and replace the rear door of the Ford F-150 truck bed. First, move to the rear of the vehicle and disconnect the electrical connector next to the wheel arch; then unscrew the fixing screws of the door opening, releasing the two side rods, as shown in the video. At this point, it will be possible to gently remove the truck bed door, carry out the repair or replacement; reassemble and correctly align the door, applying the reverse process!

Posted on 23 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Headlight on a Ford F-150?
How to Remove the Rear Headlight on a Ford F-150?
Ford F-150 (2015-2020 / MK 13) In this tutorial, you will see how to remove the rear headlight on a Ford F-150 pickup, in case you need to replace a burnt-out bulb or the headlight…
Replace the Rear Light Assembly on the Ford F-150 MK12
Replace the Rear Light Assembly on the Ford F-150 MK12
Ford F-150 (2009-2014 / MK 12) Today, you will learn how to remove and replace the rear light on the Ford F-150 in its twelfth generation in simple and quick steps. First, open the…
How to Replace the Taillights on a Ford F-150 Pickup?
How to Replace the Taillights on a Ford F-150 Pickup?
Ford F-150 (2015-2020 / MK 13) As seen in this tutorial, replacing the taillights on a Ford F-150 pickup is a very simple and quick operation. First, open the tailgate, then locate…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos