Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : Removal of the mudguard on Ford Focus

Ford Focus - Video tutorial

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Front bumper
Operation: Removal of the mudguard on Ford Focus

Remove the plastic placed externally on the front pillar, near the mirror, using a screwdriver or a plastic lever. Then remove the now uncovered screw, which was just behind that plastic. Raise the car with a ratchet and, working from below, unscrew the screws that hold the mudguard in the vicinity of the wheel obviously, as shown in the video. Raise the hood as well to work with greater room for maneuver, by placing the appropriate support rod. Once all the screws have been removed you can simply detach the fender by hand and mount the new one in the same way.


Posted on 24 March 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos