Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Fiesta
    4. : Ford Fiesta speaker replacement

Ford Fiesta - Video tutorial

Model: Ford Fiesta MK VII, Fiesta 7, MK 7 - Years 2017-2023
Part: Loudspeaker
Operation: Ford Fiesta speaker replacement

Remove the upper plastic of the internal handle, then the screw cover near the opening handle and unscrew the three screws now exposed (two in the handle and one near the handle). Then unscrew the fourth screw located in the lower part of the door. At this point you can extract the panel. Disconnect the two connectors (electric glass and lock). Now unscrew the three screws that secure the speaker, remove the jack and the speaker with the support. Then screw the new circular support, then the case and everything else obviously proceeding backwards. It is, as you can see, a maintenance that is not very fast but quite easy.


Posted on 25 March 2024 by ScegliAuto



Remove the Ford Fiesta speaker
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) Remove the speaker of the Ford fiesta? Let's see how to remove the door panel and the speaker under it. Let's unscrew the screw located in the space
How to remove the speaker of a Ford Fiesta
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) Let's see in this video how to remove the internal speaker of a Ford Fiesta with its door panel. To begin, let's unscrew the screw located under the
How to disassemble the front speaker of the Ford Fiesta.
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) Below we will see the instructions that will allow us to disassemble and replace the front speaker of the Ford Fiesta. First, we open the front or re

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos