Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Speaker of the Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Speaker

Here are the instructions to remove and replace the front speaker of the Ford Fiesta. First, open the front or rear door and start by removing the door panel by unscrewing the fastening screws found on the opening handle and the grab handle; then pry on the sides of the panel to detach and remove it, disconnecting the handle cable and the electric connector of the window switch, as shown in the video. Unscrew the speaker screws to remove it, disconnect the connector, and replace it with the new one!

Updated on 29 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Speaker from a Ford Fiesta
How to Remove the Speaker from a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this video, see how to remove the internal speaker of a Ford Fiesta along with the door panel. First, unscrew the screw located under the door han…
How to Remove the Front Door Panel on the Ford Fiesta?
How to Remove the Front Door Panel on the Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this tutorial, see how to remove the front door panel on the Ford Fiesta, a very simple and quick operation. First, open the door in question, the…
How to replace the front headlight on the Ford Fiesta?
How to replace the front headlight on the Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) To replace the front headlight on the Ford Fiesta, open the bonnet and loosen the screws located at the top of the headlight on its supports. Once th…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos