Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Window Switch on a Ford Fiesta?

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Window switch

To replace the window switch on a Ford Fiesta, completely remove the corresponding door panel: this can be done by unscrewing the appropriate fixing screws. These screws are located in the centre of the panel, beneath the switch panel and inside the handle of the door. Once these screws are loosened, detach the panel and disconnect the connector attached to the switch panel: the switch can then be removed from its housing and replaced with a new spare part.

Updated on 26 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Door Window Switch on a Ford Fiesta?
How to Replace the Rear Door Window Switch on a Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) If you have a malfunctioning electric window on your vehicle, follow the procedure below to restore its function. First, you need to remove the door …
How to Replace the Reverse Switch on a Ford Fiesta?
How to Replace the Reverse Switch on a Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) To replace the reverse switch on a Ford Fiesta, access the underside of the car near the engine bay. The switch will be located next to the gearbox a…
How to Replace the Rear Window Regulator on a Ford Fiesta?
How to Replace the Rear Window Regulator on a Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) To replace the rear window regulator on a Ford Fiesta, loosen the screws located in the handle recess of the door and the one near the window switch …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos