Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Window Switch on the Ford Fiesta?

Model: Ford Fiesta MK 7, MK VII, Fiesta 7 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Push button

See other generations:
Video tutorial

To replace the window switch on the Ford Fiesta, use a tool to lever the switch out of its housing. Once extracted, disconnect the connector attached to its underside.

Then, connect the new switch to the corresponding connector and insert it back into its housing. This operation can be performed on all passenger doors.

After replacement, check the proper functioning of the installed parts.


Updated on 25 April 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Side Window of the Ford Fiesta
How to Replace the Rear Side Window of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Follow these main steps to remove and replace the rear side window of the Ford Fiesta. First, open the rear door and start removing the door panel by…
How to Reset the Window Regulator Motor of the Ford Fiesta
How to Reset the Window Regulator Motor of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Follow these instructions to reset the window regulator motor of the Ford Fiesta in simple steps. First, get inside the vehicle and turn on the ignit…
How to Replace the Window Regulator Mechanism on the Ford Fiesta
How to Replace the Window Regulator Mechanism on the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Follow these step-by-step instructions to remove and replace the window regulator mechanism on the Ford Fiesta. First, open the front door and remove…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos