Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Window Regulator Mechanism on the Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017

See other generations:
Video tutorial

Follow these step-by-step instructions to remove and replace the window regulator mechanism on the Ford Fiesta. First, open the front door and remove the door panel by unscrewing all the fixing screws located on the sides; then disconnect the electrical connector of the window switch and the handle cable, as shown in the video.

Now, unscrew the screws of the side glass brackets to remove it; subsequently, remove the entire window regulator mechanism and replace it with the new one!


Updated on 22 August 2026 by ScegliAuto


Related tutorials

How to Remove and Replace the Window Switch on the Ford Fiesta
How to Remove and Replace the Window Switch on the Ford Fiesta
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) Removing and replacing the window switch takes just a few minutes; here’s how to do it on the Ford Fiesta. First, open the front door of your car and…
Removing the Door Panel of a Ford Fiesta
Removing the Door Panel of a Ford Fiesta
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) In this video tutorial, you will see instructions on how to remove the door panel of a Ford Fiesta. First, open the front door and remove the plastic…
How to Replace the Rear Window Regulator on a Ford Fiesta?
How to Replace the Rear Window Regulator on a Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) To replace the rear window regulator on a Ford Fiesta, loosen the screws located in the handle recess of the door and the one near the window switch …

    Frequently Asked Questions

    • Fiesta 1996-2002 - How to replace the ignition lock on a Ford Fiesta? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos