Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Window Switch on the Ford Fiesta

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008
Part: Power window switch

Removing and replacing the window switch takes just a few minutes; here’s how to do it on the Ford Fiesta. First, open the front door of your car and start prying off the plastic cover located under the switch, near the grab handle, using something thin and pointed; then disconnect the electrical connector of the buttons themselves, as shown in the video. At this point, remove and replace the window switch with the new one; reconnect the electrical connection and test the operation before reassembling everything!

Updated on 22 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Dismantling Window Switch and Door Panel on Ford Fiesta
Dismantling Window Switch and Door Panel on Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Today, in this video tutorial, we will see how to dismantle the window switch along with the door panel of a Ford Fiesta mk7. First, open the door: r…
How to Replace the Window Regulator Mechanism on the Ford Fiesta
How to Replace the Window Regulator Mechanism on the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Follow these step-by-step instructions to remove and replace the window regulator mechanism on the Ford Fiesta. First, open the front door and remove…
How to Replace the Window Switch on the Ford Fiesta?
How to Replace the Window Switch on the Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) To replace the window switch on the Ford Fiesta, use a tool to lever the switch out of its housing. Once extracted, disconnect the connector attached…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos