Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Fiesta
    4. : How to remove the Ford Fiesta door panel and speaker

Ford Fiesta - Video tutorial

Model: Ford Fiesta MK VI, Fiesta 6, MK 6 - Years 2008-2017
Part: Door panel
Operation: How to remove the Ford Fiesta door panel and speaker

Let's find out in this guide the steps that will allow us to remove the door panel and then the speaker of the Ford Fiesta. First we open the front door and start removing the plastic cover of the handle; after which we unscrew all the fixing screws that we find on the door panel, using a Phillips screwdriver and a torx screwdriver, as shown in the video. At this point we remove the window control panel, disconnecting the electrical connector, and pry the sides of the panel to unhook and remove it, following the video to the end!


Posted on 19 May 2024 by ScegliAuto



Remove the Ford Fiesta speaker
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) Remove the speaker of the Ford fiesta? Let's see how to remove the door panel and the speaker under it. Let's unscrew the screw located in the space
How to remove the speaker of a Ford Fiesta
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) Let's see in this video how to remove the internal speaker of a Ford Fiesta with its door panel. To begin, let's unscrew the screw located under the
Ford Fiesta panel speaker disassembly
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) Let's see how the speaker of the cover panel of a Ford Fiesta is removed. We open the door, find the tightening screws inside the cover panel. We rem

    Frequently Asked Questions

    • Fiesta 2017-2023 - How to remove the passenger side door panel in the Ford Fiesta mk7? Read Answer
    • Fiesta 2008-2017 - How to remove the door panel of a Ford Fiesta? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos