Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Fiesta
    4. : Ford Fiesta door panel disassembly

Ford Fiesta - Video tutorial

Model: Ford Fiesta MK VI, Fiesta 6, MK 6 - Years 2008-2017
Part: Door panel
Operation: Ford Fiesta door panel disassembly

Let's see how the cover panel is removed from above the door of a Ford Fiesta. We remove the lining that covers the handle: with a torx insert screwdriver we go to unscrew the screws of the internal door handle, we unscrew the screws placed in the handle. We also unscrew the screws located in the interior door opening lever. We detach the door panel, unhook the clamps of the window lifters and speakers. Removed the panel, we detach the adhesive cover from the sheet and work inside, or we replace the cover panel if damaged. We assemble the panel in all its parts.


Posted on 9 January 2024 by ScegliAuto



How to remove the door panel of a Ford Fiesta
Ford Fiesta (2002-2008 / MK V, Fiesta 5, MK 5) How to remove the door panel of a Ford Fiesta? Let's see the disassembly of the right door panel. Before starting the disassembly work, let's disconn
How to remove the front door panel of a Ford Fiesta
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) Before we can begin, we will have to go and open the front door of our Ford Fiesta. So let's start by disengaging, extracting and removing the door p
How to remove the front door panel of a Ford Fiesta?
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) Before we begin, we will need to open the front door of our Ford Fiesta. Using a thin but strong tool, we begin by disengaging, pulling out and remov

    Frequently Asked Questions

    • Fiesta 2017-2023 - How to remove the passenger side door panel in the Ford Fiesta mk7? Read Answer
    • Fiesta 2008-2017 - How to remove the door panel of a Ford Fiesta? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos