Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : Removal of rear seats on Ford Focus Mk3

Ford Focus - Video tutorial

Model: Ford Focus MK 3 - Years 2011-2018
Part: Seat
Operation: Removal of rear seats on Ford Focus Mk3

Discover the area under the rear seats and unscrew the four screws present here, as shown in the video. In doing so, before removing the screws, loosen all of them a little, and when all four are loosened proceed with the removal. Already done! It is only these brackets that hold the seats anchored. So, once the screws have been removed, put your hand between the seat and the backrest and pull, removing the seat itself. At this point you can see the hook that acts as a reference point for inserting the seat. With a torx of 50 unscrew the pins relating to the seat belt, finally to remove the seats "knock" on the side mechanisms with a flat screwdriver and hammer, making them come out of their seat.


Posted on 28 March 2024 by ScegliAuto

    Frequently Asked Questions

    • Focus 2011-2018 - How do you replace the rear seats of the Ford Focus? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos