Do it yourself
Frequently asked questions about cars and motorcycles

Removing Brake Light Switch on Ford Focus MK3

Model: Ford Focus MK 3 - Years 2011-2018

In today's tutorial, you will learn how to remove and replace the brake pedal switch on a Ford Focus MK3 in simple steps. First, open the front door and locate the switch; then, to remove it, rotate it clockwise and lift it upwards, as shown in the video. At this point, disconnect the electrical connector so you can replace it with the new one; simply reconnect the connector and insert it back in place, following the reverse procedure of disassembly and checking its operation!

Updated on 9 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Focus (2011-2018 / MK 3) In this video tutorial, you will learn how to remove and replace the brake light switch on a third-generation Ford Focus by following these simple st…
Ford Focus (2011-2018 / MK 3) This video explains how to remove and replace the brake light switch on a Ford Focus. Once you locate the brake pedal, it will be easy to find the sw…
Ford Focus (1998-2004 / MK 1) Before starting, open the rear boot of your Ford Focus. Begin by unclipping and removing the clips that secure the third brake light to its housing, …

    Frequently Asked Questions

    • Focus 2004-2011 - Where are the fuse boxes in the Ford Focus Mk2? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos