Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Light Switch on a Ford Focus MK3

Model: Ford Focus MK 3 - Years 2011-2018

In this video tutorial, you will learn how to remove and replace the brake light switch on a third-generation Ford Focus by following these simple steps. First, open the front door and disconnect the electrical connector of the switch by pressing the tabs; then slightly rotate the switch to extract it, as shown in the video. At this point, you can install the new one by connecting the electrical cable and inserting it correctly into its housing; all that’s left is to check its proper functioning!

Updated on 11 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Brake Light Switch on Ford Focus MK3
Removing Brake Light Switch on Ford Focus MK3
Ford Focus (2011-2018 / MK 3) In today's tutorial, you will learn how to remove and replace the brake pedal switch on a Ford Focus MK3 in simple steps. First, open the front door …
Replacing the Brake Light Switch
Replacing the Brake Light Switch
Ford Focus (2011-2018 / MK 3) This video explains how to remove and replace the brake light switch on a Ford Focus. Once you locate the brake pedal, it will be easy to find the sw…
Where is the OBD port on the Ford Focus 3?
Where is the OBD port on the Ford Focus 3?
Ford Focus (2011-2018 / MK 3) To independently locate the position of the OBD port on your Ford Focus Mk3, follow these steps. First, open the driver's door and remove the small g…

    Frequently Asked Questions

    • Focus 2004-2011 - Where are the fuse boxes in the Ford Focus Mk2? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos