Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Brake Light Switch

Model: Ford Focus MK 3 - Years 2011-2018
Part: Light bulb

This video explains how to remove and replace the brake light switch on a Ford Focus. Once you locate the brake pedal, it will be easy to find the switch you need to replace: just follow the metal rod of the brake pedal to the top of its connection point under the dashboard. The brake light switch is mounted directly behind the brake pedal rod. Simply move it from its housing using only your hands, then disconnect the electrical connection by pressing with your index finger and thumb on the clip of one of the two terminals.

Updated on 18 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Brake Pedal Switch
Removing Brake Pedal Switch
Ford Focus (1998-2004 / MK 1) The switch mounted at the brake pedal allows the rear stop lights to illuminate when the pedal is pressed: it is generally a normally closed switch, …
How to Replace the Brake Light Switch on a Ford Focus MK3
How to Replace the Brake Light Switch on a Ford Focus MK3
Ford Focus (2011-2018 / MK 3) In this video tutorial, you will learn how to remove and replace the brake light switch on a third-generation Ford Focus by following these simple st…
Removing Brake Light Switch on Ford Focus MK3
Removing Brake Light Switch on Ford Focus MK3
Ford Focus (2011-2018 / MK 3) In today's tutorial, you will learn how to remove and replace the brake pedal switch on a Ford Focus MK3 in simple steps. First, open the front door …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos