Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Third Brake Light on a Ford Focus

Model: Ford Focus MK 2, Focus 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part:

See other generations:
Video tutorial

To remove the third brake light on a Ford Focus, start by securing the vehicle on a ramp or a stable surface to work safely. Once done, open the rear hatch of the boot to access the third brake light unit.

Now, use a screwdriver to remove the two clips located on either side of the light unit. This way, you can disengage the third brake light from its position and, after disconnecting its electrical supply, you can finally remove it.


Updated on 27 March 2026 by ScegliAuto


Related tutorials

How to Remove the Third Brake Light on a Ford Focus
How to Remove the Third Brake Light on a Ford Focus
Ford Focus (1998-2004 / MK 1) Before starting, open the rear boot of your Ford Focus. Begin by unclipping and removing the clips that secure the third brake light to its housing, …
How to Replace the Third Brake Light on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) In today's video, we will see how to replace the third brake light on a Ford Focus SW. Specifically, we will see how to intervene without replacing t…
Replacement of the rear headlight bulb of the Ford Focus
Replacement of the rear headlight bulb of the Ford Focus
Ford Focus (2011-2018 / MK 3) Below we will see the main instructions that will allow us to dismantle and replace the rear headlight bulbs of the Ford Focus. First, we open the re…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos