Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Car Radio Module

Model: Ford Fiesta MK IV, MK 4, Fiesta 4, Be91 - Years 1996-2002
Part: Car stereo

If you need to remove the factory car radio for repairs, to replace it with another of your choice, or to install an additional module, simply follow the images below to see that disassembling it is a very straightforward operation. First, obtain a pair of special forked keys. Insert them into the designated slots on either side of the car radio. Firmly push both forks outward and simultaneously extract the entire car radio module. At the back, disconnect the antenna cable and two other connectors. Car model: Ford Fiesta Year: 1998.

Updated on 12 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the ABS module on a Ford Fiesta or Focus
How to disassemble the ABS module on a Ford Fiesta or Focus
Ford Fiesta (2017-2023 / Fiesta 7, MK 7, MK VII) In this video, we see how to disassemble the ABS module on a Ford vehicle: the module is located right under the windshield wiper, and to reach it we…
Removing the Car Radio with Release Keys
Removing the Car Radio with Release Keys
Ford Fiesta (2002-2008 / MK V, Fiesta 5, MK 5) The following guide demonstrates a seemingly simple operation: removing the car radio with release keys. Inserting the four keys into the designated …
How do you reset the Sync 1 of the Ford Fiesta car radio?
How do you reset the Sync 1 of the Ford Fiesta car radio?
Ford Fiesta (2008-2017 / MK 6, Fiesta 6, MK VI) In order to reset the Sync 1 of the Ford Fiesta car radio, you will need to open the glove compartment located on the passenger side: once opened, yo…

Other guides you may be interested in

How to Replace the Rear Wheel Bearing on Peugeot 407

How to remove a rear wheel bearing along with all associated parts on a Peugeot 407? Position your car on a column lift, loosen the bolts with a socket wrench and raise it to a comfortable height. Unscrew the bolts and remove the wheel, then start unscrewing the bolts of the brake caliper to detach it from the bracket. Use a socket to loosen the caliper bolt. Now remove the caliper bracket and unscrew the bolts on the brake disc, pulling the disc towards you to slide it off the wheel hub. Completely remove the wheel hub from the car's arm and extract the worn bearing. Using a pressing tool, fit the new bearing. Before reassembling everything, clean all dirt and debris from the disassembled parts with brushes and lubricate the components. Refit the brake disc with all associated bolts.

Watch the video!


by ScegliAuto

More videos