Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the radio from the Ford Focus?

Model: Ford Focus MK 2, Focus 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Car stereo

See other generations:
Video tutorial

In this video, you can see how to remove the radio from the Ford Focus MK2. This is a very simple operation; you only need a couple of plastic spatulas to remove the inserts and a cross-head screwdriver. Start by prising off and removing the outer plastic trim using the spatulas, then proceed to unscrew the 4 fixing screws located at the corners of the radio.

Once done, pull it out of the slot and disconnect the rear connectors. Finally, fit the replacement following the model's instructions, particularly regarding the wiring.


Updated on 31 May 2026 by ScegliAuto


Related tutorials

Removing the Dashboard Radio from a Ford Focus
Removing the Dashboard Radio from a Ford Focus
Ford Focus (1998-2004 / MK 1) Learn how to replace the radio in a Ford Focus. To replace the car radio, use the removal keys that come with the radio. Insert the keys into the sid…
How to Install Car Radio on Ford Focus
How to Install Car Radio on Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) How do you remove the car radio from the Ford Focus? Let's see how to take it out from the central console of the car. Insert the keys into the holes…
How to Remove the Ford Focus Radio
How to Remove the Ford Focus Radio
Ford Focus (2011-2018 / MK 3) Briefly follow these instructions to remove and replace the standard radio of the Ford Focus in simple and quick steps. First, get inside the vehicle…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos