Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Fog Lights on a Ford Flex

Model: Ford Flex MK 1 - Years 2009-2019
Part: Fog lights

In this video, you will learn how to change the fog lights on a Ford Flex. First, remove the bulb that needs to be replaced, located under the bumper on the passenger side, by turning it halfway to extract the bulb. Next, unscrew the bulb from the connector. This task requires some precision but is not overly complicated. At this point, you can attach the new bulb and reposition it under the bumper. Once you finish the job, move to the driver's side and follow the same procedure previously explained.

Updated on 1 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front fog light bulb of the Ford Flex
How to replace the front fog light bulb of the Ford Flex
Ford Flex (2009-2019 / MK 1) Today we will explain how to replace the fog light bulb of a Ford Flex vehicle. First, remove the bottom part of the vehicle and then remove the cove…
How to Replace the Key Battery in the Ford Flex
How to Replace the Key Battery in the Ford Flex
Ford Flex (2009-2019 / MK 1) In this new mini guide about the Ford Flex, we will discover how to replace the key battery. First, locate the small button on the bottom of the cove…
How to Replace the Headlight Bulb on a Ford Flex?
How to Replace the Headlight Bulb on a Ford Flex?
Ford Flex (2009-2019 / MK 1) To replace the headlight bulb on a Ford Flex, open the hood to access the components inside the engine compartment. Specifically, disconnect the conn…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos