Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter in a Ford Flex?

Model: Ford Flex MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Air filter

Video tutorial

Replacing the air filter in a Ford Flex is a very simple and quick task. First, wait for the engine to cool completely for safety.

Then, open the hood and locate the air filter box in front of the battery. Next, unlock the two metal clips along the front edge, disconnect the sensor connector if the cable is too short, and lift the top half of the airbox.

At this point, you can remove the old filter, clean the inside of the housing, and install the new one.


Updated on 4 August 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter on a Ford Flex
Ford Flex (2009-2019 / MK 1) If you notice a decline in air quality when you turn on the air conditioning in your Ford Flex, it's time to replace the air filter. Let's see how to…
How to Replace the Air Filter on the Ford Flex
How to Replace the Air Filter on the Ford Flex
Ford Flex (2009-2019 / MK 1) To replace the engine air filter, follow these steps: open the hood, locate the box containing the filter on the left side of the engine compartment,…
How to Replace the Key Battery in the Ford Flex
How to Replace the Key Battery in the Ford Flex
Ford Flex (2009-2019 / MK 1) In this new mini guide about the Ford Flex, we will discover how to replace the key battery. First, locate the small button on the bottom of the cove…

Other guides you may be interested in

How to enter the radio code in the Opel Zafira?

In the Opel Zafira, it may happen that the radio locks and consequently requests the appropriate security code, especially after disconnecting or replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. Once obtained, enter it by following the procedure shown in this tutorial. First, switch on the instrument panel, then press and hold both the "AS" button and the left knob for about 5 seconds. Next, enter the first digit by repeatedly pressing the "1" button, continue with the next 3 buttons, and save the setting by pressing the "AS" button again.

Watch the video!


by ScegliAuto

More videos