Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on the Ford Flex

Model: Ford Flex MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Air filter

Video tutorial

To replace the engine air filter, follow these steps: open the hood, locate the box containing the filter on the left side of the engine compartment, and disconnect the power connector of the air sensor on the tubing. Next, unclip the retaining clips of the filter cover and lift it off. Remove the old filter and take the new one (always check the specifications to ensure the filter type is suitable for your vehicle).

If necessary, clean the housing area and install the new filter. Finally, reattach the cover and secure the metal clips, and the job is complete.


Updated on 18 May 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter on a Ford Flex
Ford Flex (2009-2019 / MK 1) If you notice a decline in air quality when you turn on the air conditioning in your Ford Flex, it's time to replace the air filter. Let's see how to…
How to Replace the Air Filter in a Ford Flex?
How to Replace the Air Filter in a Ford Flex?
Ford Flex (2009-2019 / MK 1) Replacing the air filter in a Ford Flex is a very simple and quick task. First, wait for the engine to cool completely for safety. Then, open the hoo…
How to Replace the Rear Headlight Bulbs on a Ford Flex?
How to Replace the Rear Headlight Bulbs on a Ford Flex?
Ford Flex (2009-2019 / MK 1) In this tutorial, you will see how to replace the rear headlight bulbs on a Ford Flex, a very simple and quick operation. Before doing this, ensure t…

How to enter the radio code in the Opel Zafira?

In the Opel Zafira, it may happen that the radio locks and consequently requests the appropriate security code, especially after disconnecting or replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. Once obtained, enter it by following the procedure shown in this tutorial. First, switch on the instrument panel, then press and hold both the "AS" button and the left knob for about 5 seconds. Next, enter the first digit by repeatedly pressing the "1" button, continue with the next 3 buttons, and save the setting by pressing the "AS" button again.

Watch the video!


by ScegliAuto

More videos