Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlight Bulbs on a Ford Flex?

Model: Ford Flex MK 1 - Years 2009-2019
Part: Tail light bulb

In this tutorial, you will see how to replace the rear headlight bulbs on a Ford Flex, a very simple and quick operation. Before doing this, ensure the key is not in the ignition for safety. Start by opening the trunk, then using an 8mm socket wrench, remove the two screws located along the inner edge of the headlight to be removed. Once done, grasp the headlight, pull it towards you, and extract it from the body. To remove a bulb from the housing, simply rotate it slightly counterclockwise.

Updated on 27 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Headlight Bulbs on a Ford Flex?
How to Replace the Rear Headlight Bulbs on a Ford Flex?
Ford Flex (2009-2019 / MK 1) As shown in this tutorial, replacing the rear headlight bulbs on a Ford Flex is a very simple and inexpensive task. Before proceeding, ensure the key…
How to replace the front fog light bulb of the Ford Flex
How to replace the front fog light bulb of the Ford Flex
Ford Flex (2009-2019 / MK 1) Today we will explain how to replace the fog light bulb of a Ford Flex vehicle. First, remove the bottom part of the vehicle and then remove the cove…
How to Replace the Headlight Bulb on a Ford Flex?
How to Replace the Headlight Bulb on a Ford Flex?
Ford Flex (2009-2019 / MK 1) To replace the headlight bulb on a Ford Flex, open the hood to access the components inside the engine compartment. Specifically, disconnect the conn…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos