Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on a Ford Flex?

Model: Ford Flex MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight bulb

Video tutorial

To replace the headlight bulb on a Ford Flex, open the hood to access the components inside the engine compartment. Specifically, disconnect the connector attached to the headlight so that the bulb inside can be extracted from its housing.

Once the bulb is removed, connect the new replacement piece to the connector, inserting it back into the headlight. After closing the hood, check that the newly installed device works correctly.


Updated on 20 May 2026 by ScegliAuto


Related tutorials

How to replace the front fog light bulb of the Ford Flex
How to replace the front fog light bulb of the Ford Flex
Ford Flex (2009-2019 / MK 1) Today we will explain how to replace the fog light bulb of a Ford Flex vehicle. First, remove the bottom part of the vehicle and then remove the cove…
How to Replace the Rear Headlight Bulbs on a Ford Flex?
How to Replace the Rear Headlight Bulbs on a Ford Flex?
Ford Flex (2009-2019 / MK 1) As shown in this tutorial, replacing the rear headlight bulbs on a Ford Flex is a very simple and inexpensive task. Before proceeding, ensure the key…
How to Replace the Rear Headlight Bulbs on a Ford Flex?
How to Replace the Rear Headlight Bulbs on a Ford Flex?
Ford Flex (2009-2019 / MK 1) In this tutorial, you will see how to replace the rear headlight bulbs on a Ford Flex, a very simple and quick operation. Before doing this, ensure t…

Other guides you may be interested in

How to enter the radio code in the Opel Zafira?

In the Opel Zafira, it may happen that the radio locks and consequently requests the appropriate security code, especially after disconnecting or replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. Once obtained, enter it by following the procedure shown in this tutorial. First, switch on the instrument panel, then press and hold both the "AS" button and the left knob for about 5 seconds. Next, enter the first digit by repeatedly pressing the "1" button, continue with the next 3 buttons, and save the setting by pressing the "AS" button again.

Watch the video!


by ScegliAuto

More videos