Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front fog light bulb of the Ford Flex

Model: Ford Flex MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight bulb

Video tutorial

Today we will explain how to replace the fog light bulb of a Ford Flex vehicle. First, remove the bottom part of the vehicle and then remove the cover of the front wheels in order to have a side access.

Insert your hand inside and bring the bulb downwards to disconnect it from its connector and proceed with the replacement. The bulb we suggest installing is a SYLVESTAR H11. After replacing the bulb, reassemble everything and proceed by following the same steps for the left fog light.

If there are further issues, it may be necessary to replace the fuse.


Posted on 5 July 2025 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb on a Ford Flex?
How to Replace the Headlight Bulb on a Ford Flex?
Ford Flex (2009-2019 / MK 1) To replace the headlight bulb on a Ford Flex, open the hood to access the components inside the engine compartment. Specifically, disconnect the conn…
How to Replace Fog Lights on a Ford Flex
How to Replace Fog Lights on a Ford Flex
Ford Flex (2009-2019 / MK 1) In this video, you will learn how to change the fog lights on a Ford Flex. First, remove the bulb that needs to be replaced, located under the bumper…
How to Replace the Rear Headlight Bulbs on a Ford Flex?
How to Replace the Rear Headlight Bulbs on a Ford Flex?
Ford Flex (2009-2019 / MK 1) As shown in this tutorial, replacing the rear headlight bulbs on a Ford Flex is a very simple and inexpensive task. Before proceeding, ensure the key…

How to enter the radio code in the Opel Zafira?

In the Opel Zafira, it may happen that the radio locks and consequently requests the appropriate security code, especially after disconnecting or replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. Once obtained, enter it by following the procedure shown in this tutorial. First, switch on the instrument panel, then press and hold both the "AS" button and the left knob for about 5 seconds. Next, enter the first digit by repeatedly pressing the "1" button, continue with the next 3 buttons, and save the setting by pressing the "AS" button again.

Watch the video!


by ScegliAuto

More videos