Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the AdBlue Fluid Tank on a Ford F-250?

Model: Ford F-250 P473 - Years 2011-2016
Part: AdBlue warning light

To replace the AdBlue fluid tank on the Ford F-250, access the underside of the vehicle to loosen the screws securing the protection panel. Once the panel is removed, disconnect the tank hose connected directly to the refill opening. Next, loosen all the bolts securing the tank and its connectors so that the tank can be removed. At this point, install a new replacement part by connecting and securing it.

Updated on 3 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the AdBlue Warning Light on a Ford F-250 Pickup?
How to Reset the AdBlue Warning Light on a Ford F-250 Pickup?
Ford F-250 (2011-2016 / P473) If the AdBlue warning light has illuminated on the dashboard of your Ford F-250 pickup, it means that the fluid in the emissions system has reached t…
How to Reset the Service Light on a Ford F-250
How to Reset the Service Light on a Ford F-250
Ford F-250 (2011-2016 / P473) Today, I will show you how to reset the oil change light on a Ford F-250 by yourself. Turn on the ignition and press the menu button on the steering …
How to Replace the Air Filter on a Ford F-250
How to Replace the Air Filter on a Ford F-250
Ford F-250 (1999-2007 / Phn131) To replace the air filter on a Ford F-250, open the hood to access the engine compartment: the air filter is located inside, directly under the coola…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos